Hebei Zhongda Machinery Accessories Co., Ltd
+86 18833788629
Global
Home
Company
News
Product
Feedback
Contact
English
中文版
Sprocket news
Motorcycle Sprocket
Industry news
Company news
What problems should be paid attention to in the installation of sprocket?
Sprocket is an important part of transmission equipment. In order to extend its service life, we need to install it firmly in the later stage of the device, so that the running in of each part can reach the standard. Therefore, we need to stop the correct and reasonable device
28
2019
/
08
When does motorcycle sprocket need to be replaced?
motorcycle Whether the chain wheel needs to be replaced or not depends on the wear condition of your chain wheel. The mileage of the chain wheel to be replaced ranges from 15000km to 20000km. The chain needs to be replaced together to ensure the replacement quality. If the chain is excessively worn, the chain will drag and slip. The adjustment clearance of the newly replaced chain should be kept at 15-20mm. The adjustment can refer to the scale mark marked by the factory, but it should not be changed I can fully believe that after such a long time of riding, the center axle and fork of the motorcycle will show signs of deviation from the chain, so it is better to remove the chain shoe and observe whether the front and rear sprockets are in the same plane from the rear of the wheel.
When do motorcycle sprockets need to be replaced?
Motorcycle Sprocket need not need to replace it is mainly to see your Sprocket wear, by replacing the number of kilometers in 15000KM to 20000KM, the need to replace the chain together to ensure the replacement of quality, if the chain excessive wear will appear towline, slip phenomenon, the new replacement of the chain adjustment gap should be maintained at 15-20 mm, the adjustment can refer to the factory manufacturers marked tick but can not fully believe, because the vehicle after such a long time riding, motorcycle axis and fork in general, there will be signs of remove the chain tile from behind the wheel to see if the front and rear sprockets are on the same plane.
11
2021
03
What are the problems with the installation of the Sprocket?
Sprocket it belongs to the transmission equipment to compare important parts,in order to extend its life,we need to be strong in the late device device, so that the various parts of the run-in to reach the standard,so we need to stop the correct and reasonable device, sprocket in the device need to pay special attention to a few points:
CONTACT US
E-mail to us
zdjxpj@126.com
24-hour consultation hotline
QQ: 1556841356
Mob :+86 18833788629(Wechat)
Company address
Guanzhang Industrial Zone, Shimenqiao East, Renqiu City, Hebei Province, China
Please tell us what you need
Our engineers will contact you within 12 hours and provide suggestions and quotations.
copyright © 2022 Zhongda Machinery Accessories
Power by:300.cn | SEO | Certificate